How to Configure Default Routes on Cisco Router | Step-by

Here are the steps to configure the default route on a Cisco router using the network topology given above as an example. The first step is to assign an IP address to the interfaces of the router. Enter the following commands on each of the routers to do

在Cisco路 由器上停用ip routing時，請使用ip default-gateway 命令。 使用 ip default-network 或 ip route 0.0.0.0 0.0.0.0 命令在已啟用ip路由的Cisco路由器上設定最後選用網關。

本文檔介紹如何在增強型內部網關路由協定 (EIGRP)中配置預設路由。 Cisco建議您瞭解EIGRP。 本文件所述內容不限於特定軟體和硬體版本。 本文中的資訊是根據特定實驗室環境內的裝置所建立。 文中使用到的所有裝置皆從已清除（預設）的組態來啟動。 如果您的網路運作中，請確保您瞭解任何指令可能造成的影響。 路由器R1、R2和R3配置了EIGRP，且R3和R4之間沒有運行EIGRP。 network 192.168.12.0. D - EIGRP, EX - EIGRP external, O - OSP

This tutorial explains how to configure and use a default route in routing through a practical example in the Packet Tracer. Learn how to configure default routing in Cisco routers.

Default Routes are configured mostly in Stub Network. It is a network containing only one exit interface or only one way to reach the destination. When we configure default routes, it requires these packets to another router that has the path to the desti

In this article, we will see default routing and its configuration in the cisco packet tracer. It is a type of routing which is useful in those cases when the destination network id is unknown to the router.

默認路由 (Default route),是對IP數據包中的目的地址找不到存在的其他路由時,路由器所選擇的路由。 目的地不在路由器的路由表里的所有數據包都會使用 默認路由。