How to hard reset D-Link DIR-645 rev A1 router

Step 1: With the unit on, place a paper clip into the hole on the back of the unit labeled Reset. Step 2: Hold paper clip down for 10 seconds and release. Step 3: The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset. Rese

Press the button to restore the device to its original factory default settings. This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet,

讓我們告訴您怎麼做！ 為了獲得正確的下載，請為您的設備選擇正確的硬體版本。 如何尋找設備的「硬體版本」?

Reset在路由器電源開啟的狀態下,用迴紋針插入此孔並壓住約10秒後放開,路由器將會重開機並清空所有設定至出廠預設值。 1 、將電源接頭接上DIR-645背面的電源孔,然後將另一端接上電源插座。 電源線的一端接上DIR-645的電源孔,另外一端插上電源插座。 按下電源開關,請稍候約30秒,待電源指示燈和無線指示燈亮起後,再進行下一步網路線連接動作。 按一下電源開關來開啟電源。 2 、用一條網路線,將一端接在ADSL/ 光世代或Cable Modem數據機的網路埠中,或是插在社區寬頻、學校、宿舍等 設在牆壁

Firstly, unplug the power cord from the D-LINK DIR-645 router. Press and hold the Reset Key, while you plug back the electric cord. Keep holding the Reset Button for a moment until the first port light is on again. Excellent! You have successfully Master

You can hard reset your D-Link DIR-645 rev A1 with ways bellow With the reset button Locate the reset button on the back off the router While the unit is powered on, press the reset button with a sharp object (e.g. paperclip) Hold the button pressed for 1