Tomato Firmware Installation (Shibby mod) On ASUS RT

AdvancedTomato project is officially archived. At this time there is no plan to continue development. Below you can find alternative and older firmware files. Please take caution what you flash, if you flash too big or incorrect image file you might brick

最近購入ASUS RT-N66U，買來第一件事就是將原廠韌體刷成Tomato，硬體版本為B1，還是找了Tomato Shibby最新版來刷。

Flash the TomatoUSB firmware onto the RT-N66U. Start the firmware flashing and a prompt should appear stating that it is an incompatible firmware. Proceed to the next step. While holding down the reset button, plug in the power cable so that the RT-N66U t

9.N66U更新完之後把網路卡的IP改回自動取得IP位址，重新取得IP之後就可以用瀏覽器連上 http://192.168.1.1 進設定畫面進行後面的設定了。

K26 – Kernel 2.6, MIPSR2 – newer routers like RT-N16, E2000, E3000, E4200 (without 5GHz), WNR3500Lv1 etc. Older MIPSR1 routers are also supported K26RT-N – MIPSR2 – special builds for E4200, RT-N10U, RT-N12B1/C1/D1, RT-N15U, RT-N53

RT-N66U 刷TOMATO掛了用Firmware Restoration 上傳tomato-K26USB-1.28.RT-N5x-MIPSR2-110-AIO-64K-cht-0621不知怎樣刷了之後就 掛了也無法PING 192.168.1.1後來要在重刷都顯示無法連結無...

Running 085 right now without any issues, however I have run into the issue with only one or the two bands working on previous tomato releases. After you put the router into recovery and upload the firmware ... wait!