Reading NVMe SMART in Windows and Linux

Basedonthedevicepath,smartctlwillguessthedevicetype(ATAorSCSI).Ifnecessary,the'-d'optioncanbeusedtooverridethisguessNotethatthe ...,ThisistypicallyanissuewiththeUSBcontroller.Someofthemareeasywithsmartctlothersarenot.Youcantrytospecifiythedevicet...。參考影片的文章的如下：

How to Fix the Hard Drive Bad Sector [LinuxUbuntu GUIDE]
How to Fix the Hard Drive Bad Sector [LinuxUbuntu GUIDE]
Disk Drive Recovery On Linux - sudo Sergeant 25
Disk Drive Recovery On Linux - sudo Sergeant 25
Using SMARTD for HDD Health Check | Monitoring Hard Disks with ...
Using SMARTD for HDD Health Check | Monitoring Hard Disks with ...
A permissively licensed alternative to smartctl(8) by Chuck Tuffli ...
A permissively licensed alternative to smartctl(8) by Chuck Tuffli ...
How to use Smartctl in Linux.
How to use Smartctl in Linux.
How to Perform a Self-Test on a SmartOnline® UPS System with LEDs
How to Perform a Self-Test on a SmartOnline® UPS System with LEDs
Free HDD SSD SMART Table Reader for Linux
Free HDD SSD SMART Table Reader for Linux
How to Perform a Self-Test on a SmartOnline® UPS System with LCD
How to Perform a Self-Test on a SmartOnline® UPS System with LCD
How to Check Drive Health and SMART Status in Windows 11
How to Check Drive Health and SMART Status in Windows 11
How to see if your Hard Drive is dying with S.M.A.R.T Data tools ...
How to see if your Hard Drive is dying with S.M.A.R.T Data tools ...

參考內容推薦

smartctl

Based on the device path, smartctl will guess the device type (ATA or SCSI). If necessary, the '-d' option can be used to override this guess Note that the ...

Can't perform smartctl in External hdd - Newbie

This is typically an issue with the USB controller. Some of them are easy with smartctl others are not. You can try to specifiy the device type ...

please specify device type with the -d option

OMV is issueing the smartctl command without the -d option. I need the -d option to explicitly state that the drives are SATA drives.

smartctl(8)

See '-r ataioctl' below for details. Based on the device path, smartctl will guess the device type (ATA or SCSI). If necessary, the '-d' option can be used ...

smartctl

smartctl controls the Self-Monitoring, Analysis and Reporting Technol- ogy (SMART) system built into most ATA/SATA and SCSI/SAS hard drives and solid-state ...

smartctl(8) — smartmontools — Debian unstable

smartctl controls the Self-Monitoring, Analysis and Reporting Technology (SMART) system built into most ATA/SATA and SCSI/SAS hard drives and solid-state drives ...

smartctl on external hdd inside ide-to

... smartctl with the -d option: -d TYPE, --device=TYPE Specify device type to one of: ata, scsi, sat[,N][+TYPE], usbcypress[,X], usbjmicron[,x][ ...

smartctl & device type mismatch - scsi

smartctl --scan is mostly name-based: ata looks for /dev/hd*, whereas /dev/sd* devices are detected as scsi. You'll get more reliable results with smartctl -- ...

S.M.A.R.T.

You may need to specify a device type. For example, specifying --device=ata tells smartctl that the device type is ATA, and this prevents smartctl from issuing ...

SOLVED - Unable to detect device type

/dev/da0p1: Unable to detect device type. Please specify device type with the -d option. Use smartctl -h to get a usage summary.

smartctldevicetype

Basedonthedevicepath,smartctlwillguessthedevicetype(ATAorSCSI).Ifnecessary,the'-d'optioncanbeusedtooverridethisguessNotethatthe ...,ThisistypicallyanissuewiththeUSBcontroller.Someofthemareeasywithsmartctlothersarenot.Youcantrytospecifiythedevicetype ...,OMVisissueingthesmartctlcommandwithoutthe-doption.Ineedthe-doptiontoexplicitlystatethatthedrivesareSATAdrives.,See'-rataioctl'belowfordetails....

參考資訊如下