CAN ESD system-level protection

直接和body相接的端點不需做ESD rule. 所以source 端通常不需要.但是也有些電路S / D 與sub接不同點,此時兩端都要follow ESD rule.

NMOS元件本身便可當做ESD防謢元件來用，但是其佈局. 方式必須遵守Design Rules中有關ESD佈局方面的規定。在. 輸入PAD，因CMOS積體電路的輸入PAD一般都是連接到. MOS元件的 ...

ESD selection guides are available in. Technical Documents at www.ti.com/esd for guidance in choosing the correct type of TVS diode for a particular system.

It is important that the ESD current path provided by the ESD protection device is the lowest resistance path, away from the node being protected. Guard rings ...

ESD protection design guidelines aim to prevent ESD events in terms of voltage as well as current.

We use a ESD runset checker in layout tools plus a manaul check list to guarantee ESD success, the automatic checker is something like DRC.

ESD hardening of a system involves the electric, mechanical, and software design of a system. All exposed metal must be grounded to chassis ground. Hardening a ...

In order to keep EMI emissions at a minimum, circuit traces between the ESD Source and the TVS should have corners which do not exceed 45° or, ideally, which ...

1. Minimize any inductance between the ESD source and the path to ground through the TVS 2. Place the TVS as close to the ESD source or connector as design ...